Machinery for asphalt paving

Asphalt (specifically, asphalt concrete) has been widely used since the 1920s. The viscous nature of the bitumen binder allows asphalt concrete to sustain significant plastic deformation, although fatigue from repeated loading over time is the most common failure mechanism.

As asphalt consists of mineral aggregate bound together with bitumen, and then laid in layers, and compacted for its manufacturing and spreading following equipment is required: crushers, trucks, aggregate distributors. We will pay special attention to crushers.

A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust.

Each crusher is designed to work with a certain maximum size of raw material, and often delivers its output to a screening machine which sorts and directs the product for further processing.

Some crushers are mobile and can crush rocks as large as 60 inches. In a mobile road operation, these crushed rocks are directly combined with concrete and asphalt which are then deposited on to a road surface. This removes the need for hauling over-sized material to a stationary crusher and then back to the road surface.

For bituminous surfacing following equipment is required: bitumen boiler, bitumen sprayer, pavers, rollers and others. We will describe some of them.

Paveris a piece of construction equipment used to lay asphalt on roads, bridges, parking lots and other such places. It lays the asphalt flat and provides minor compaction before it is compacted by a roller.

The asphalt is added from a dump truck or material transfer unit into the paver's hopper. The conveyor then carries the asphalt from the hopper to the auger. The auger places a stockpile of material in front of the screed. The screed takes the stockpile of material and spreads it over the width of the road and provides initial compaction.

The paver should provide a smooth uniform surface behind the screed. In order to provide a smooth surface a free floating screen is used.

To conform to the elevation changes for the final grade of the road modern pavers use automatic screed controls, which generally control the screed's angle of attack from information gathered from a grade sensor.

In order to provide a smooth surface the paver should proceed at a constant speed and have a consistent stockpile of material in front of the screed. Increase in material stockpile or paver speed will cause the screed to rise resulting in more asphalt being placed therefore a thicker mat of asphalt and an uneven final surface. Alternatively a decrease in material or a drop in speed will cause the screed to fall and the mat to be thinner.

The need for constant speed and material supply is one of the reasons for using a material transfer unit in combination with a paver. A material transfer unit allows for constant material feed to the paver without contact, providing a better end surface. When a dump truck is used to fill the hopper of the paver, it can make contact with the paver or cause it to change speed and affect the screed height.

Source: http://en.wikipedia.org/wiki/

Date: 2015-12-12; view: 454; Нарушение авторских прав